Short answer
A passenger-to-freighter conversion removes the passenger cabin and modifies the aircraft for dedicated cargo operations. Typical work includes a large main-deck cargo door, reinforced or modified floors, cargo loading and restraint equipment, fire-protection changes and revised manuals. The finished aircraft must meet the approved conversion design before returning to service.
Answer
A passenger-to-freighter conversion, usually shortened to P2F, rebuilds a passenger aircraft for dedicated cargo service. It is a substantial engineering programme. Removing the seats creates space, but that alone does not make the cabin suitable for carrying freight.
1. Strip and prepare the airframe
The conversion facility removes passenger seats, cabin furnishings and equipment that is no longer needed. Technicians inspect the aircraft and prepare the areas affected by the modification. The condition and records of the individual airframe matter because the conversion starts with an aircraft that has already been in service.
2. Create cargo access and a suitable floor
Most conventional main-deck P2F programmes install a large cargo door so pallets or containers can enter the former passenger cabin. Cutting that opening requires structural changes around it. The floor and its supporting structure are modified or reinforced for the approved cargo loads.
Freight loads are not spread in the same way as passengers sitting in rows. The approved design therefore specifies where cargo can sit, how much each position can carry and how it must be secured.
3. Install the freighter equipment
The work includes loading and restraint systems, suitable cargo-compartment linings and the fire-protection features required by the design. Barriers or partitions protect occupied areas. Passenger windows and doors may be deactivated or changed, depending on the programme.
Aircraft systems, weight-and-balance information, maintenance instructions and operating manuals are updated to reflect the new configuration. The conversion design is normally approved through a Supplemental Type Certificate (STC). Each converted aircraft must conform to the approved design and complete the required inspections and tests.
What changes for the operator?
The resulting freighter has its own loading limits, permitted balance range (the centre-of-gravity envelope) and operating procedures. Similar-looking conversions can have different capabilities, even when they started as the same passenger model.
Names such as BCF, PCF and BDSF help identify conversion programmes. A 777-300ERSF, for example, differs from a factory-built 777F because it began as a longer passenger 777-300ER. Production freighters are designed and manufactured for their cargo role from the outset; P2F aircraft reach that role through an approved modification.
Explore the job market
See the requirements in real pilot jobs
Explore openings in this career path and check each employer’s requirements.