FAQ ANSWER

How do pilots communicate with air traffic control?

Short answer

Pilots normally communicate with air traffic control by radio, using an aircraft callsign and standard phrases. They listen on the assigned frequency, make requests and read back important instructions. During a flight, they change frequencies as responsibility passes between controllers. Some equipped aircraft also exchange clearances through data-link messages.

Answer

From the cockpit, communication with air traffic control means listening, identifying the aircraft clearly and confirming that instructions have been understood. Pilots use standard phraseology so that short calls carry a precise meaning, even when crews and controllers speak English as a second language.

One flight, several radio frequencies

A flight usually passes through several controllers’ areas of responsibility. Ground, tower, departure, en-route and approach services may each use different frequencies. When instructed to contact the next unit, the crew changes frequency and establishes communication with that controller.

Every call needs the correct aircraft callsign. This helps prevent a crew from accepting an instruction intended for another flight with a similar name or number. Pilots also listen before transmitting because several aircraft may share the same frequency.

Readback is more than saying “OK”

Important details, such as an assigned level, runway instruction or heading, are repeated back as required by the applicable procedures. The controller then has a chance to hear and correct a misunderstanding. If a transmission is unclear, the crew asks for repetition or clarification rather than guessing.

Short radio terms have specific meanings. Roger, Wilco and Affirm are useful in the right context, but they do not replace a required readback. Plain language is also used when standard phrases cannot explain the situation adequately.

Who handles the radio in the cockpit?

In a two-pilot crew, radio work is normally shared according to the operator’s task division. The pilot monitoring commonly handles routine calls while the pilot flying concentrates on the aircraft’s flight path. Both still need awareness of clearances that affect the flight.

Not every message is spoken

Voice radio remains central, but suitably equipped aircraft can also use controller–pilot data-link communications, or CPDLC. This provides written exchanges for supported clearances and requests. Coverage, equipment and local procedures determine its use.

The corresponding controller-side communication process includes checking readbacks and coordinating the transfer to the next sector.

Explore the job market

See the requirements in real pilot jobs

Explore openings in this career path and check each employer’s requirements.

View 118 pilot jobs
Recommended next step Pilot Career Guide

Continue your pilot path

© 2026 Skyreer – All Rights Reserved