FAQ ANSWER

What are airport slots in aviation?

Short answer

An airport slot is permission to use capacity at a coordinated airport for an arrival or departure at a specified time. It supports airline scheduling. An air traffic flow management (ATFM) slot instead manages demand on the day and may assign a calculated takeoff time (CTOT) to avoid overloading an airport or airspace sector.

Answer

“Slot” can mean an airport scheduling permission or a time restriction used to manage traffic flow. The two are connected to capacity, but they solve different problems. A flight can have an airport slot for its published schedule and still receive an ATFM delay on the day.

TermWhat it meansMain purpose
Airport slotPermission to use airport capacity at a specified date and timeMatch planned schedules to capacity at a coordinated airport
ATFM slotA departure-time allocation used for air traffic flow managementManage demand against available airport or airspace capacity
CTOTCalculated takeoff timeGive a regulated flight its target takeoff time within the applicable tolerance

Airport slots shape airline schedules

At a fully coordinated airport, airlines request slots because demand exceeds the capacity available at certain times. The constraint may involve runways, terminals, stands or other infrastructure. Slots are normally allocated in advance for a scheduling season, allowing airlines to plan services and sell tickets.

An airport slot is not a particular gate, a route right or an air traffic control clearance to take off. Those are separate parts of operating the flight. An allocated time also does not guarantee that weather or disruption will leave the airport’s planned capacity available.

An ATFM slot manages the day’s traffic

Air traffic flow management aims to keep traffic demand within what airports and airspace sectors can handle. In the European network, a regulated flight may receive a calculated takeoff time. Holding some aircraft on the ground can prevent too many from arriving at the same constrained place at once.

For example, fog may reduce a destination airport’s arrival rate. A flight can then receive a later CTOT even though the aircraft, crew and departure airport are ready. The constraint may be hundreds of kilometres away.

Why the time can change

Weather, available capacity and flight readiness can change, so flow-management timings may be revised. CTOT concerns takeoff; it is not the same as leaving the gate or the scheduled departure time shown on a ticket. That distinction also explains why block time and airborne flight time are different measures.

Explore the job market

See the requirements in real pilot jobs

Explore openings in this career path and check each employer’s requirements.

View 118 pilot jobs
Recommended next step Pilot Career Guide

Continue your pilot path

© 2026 Skyreer – All Rights Reserved