Short answer
V1 is the take-off decision speed: the stopping calculation assumes the pilot’s first action to stop the take-off begins by this speed. VR is rotation speed, when the pilot begins raising the nose. V2 is the take-off safety speed used for specified engine-out climb performance. The values depend on the aircraft and departure conditions.
Answer
V1, VR and V2 are calculated reference speeds for a particular take-off. They help define the performance available during the runway acceleration, rotation and initial climb. They are not fixed numbers that apply to every departure by the same aircraft type.
| Speed | Common name | What it relates to |
| V1 | Decision speed | The stopping and continuing performance boundaries established for the take-off |
| VR | Rotation speed | The speed at which the pilot begins raising the nose for take-off |
| V2 | Take-off safety speed | The speed reference for required take-off climb performance with an engine inoperative |
V1 and the first stopping action
In the stopping definition, V1 is the maximum speed by which the pilot must take the first action to reject the take-off and remain within the calculated stopping distance. Recognition and reaction are already part of the performance assumptions.
The continuing side of the calculation considers a specified engine-failure case and the ability to complete the take-off within the required limits. Actual reject decisions follow aircraft and operator procedures; a short definition cannot cover every possible failure or runway condition.
Rotation is not the same instant as lift-off
At VR, the pilot starts the controlled change in pitch that allows the aircraft to leave the runway. Lift-off follows as the aircraft’s attitude and aerodynamic forces develop. V2 then provides a reference for the initial climb performance case; normal operating targets can include a margin above it.
Aircraft mass, runway length and condition, wind, temperature, airport elevation, configuration and available thrust can all affect the calculation. Two flights using the same runway may therefore use different values.
These are aircraft airspeed references, rather than the groundspeed displayed by a flight tracker. Their engine-failure assumptions also help explain how an airliner can continue flying with one engine inoperative.
Explore the job market
See the requirements in real pilot jobs
Explore openings in this career path and check each employer’s requirements.