Short answer
Indicated airspeed is the speed shown by the aircraft’s airspeed instrument before certain corrections. True airspeed is its speed through the surrounding air. Groundspeed is its speed over the Earth’s surface. Wind changes the relationship between true airspeed and groundspeed, which is why tracker and cockpit speed figures can differ.
Answer
An aircraft can have several correct speed figures at the same moment. Each describes a different relationship: the reading used in the cockpit, movement through the air, or progress over the ground.
| Speed | What it describes | Typical use |
| IAS | Indicated airspeed shown by the airspeed system | Handling references, many operating limits and air traffic control speed instructions |
| TAS | True airspeed relative to the surrounding air mass | Flight planning and navigation calculations |
| Groundspeed | Speed relative to the ground | Travel time and progress along the route |
A wind example
Imagine an aircraft with a true airspeed of 450 knots (nautical miles per hour). With a 50-knot wind directly behind it, its groundspeed would be approximately 500 knots. With the same wind directly ahead, groundspeed would be approximately 400 knots. This simplified example assumes the wind is aligned with the aircraft’s track. With wind from the side, its direction as well as its speed must be included in the calculation.
The aircraft can therefore cover the ground faster without increasing its speed through the surrounding air. That is why a strong tailwind can shorten a journey and produce an impressive number on a flight tracker.
Why indicated and true airspeed differ
The airspeed indication comes from measured air pressures. Instrument, installation, compressibility and air-density effects have to be considered when relating the indication to true airspeed. At normal airline cruising altitudes, TAS is usually substantially higher than IAS. There is no single conversion factor that works at every altitude and temperature.
Mach number adds another reference: true airspeed divided by the local speed of sound. Because the speed of sound depends on air temperature, a Mach number is not one fixed speed in kilometres per hour.
Speeds used during take-off, such as V1, VR and V2, serve a different purpose from the groundspeed passengers see on a map. Likewise, the time shown in a flight schedule includes more than airborne travel; block time and flight time explain that distinction.
Explore the job market
See the requirements in real pilot jobs
Explore openings in this career path and check each employer’s requirements.