Short answer
An APU, or Auxiliary Power Unit, supplies power independently of an aircraft’s main engines. On many airliners it is a small turbine in the tail that provides electricity and, on conventional designs, compressed air for cabin systems and engine starting. Its exact functions and in-flight capabilities depend on the aircraft.
Answer
APU stands for Auxiliary Power Unit. On many passenger jets, it is a small gas-turbine engine installed in the tail. It powers aircraft systems and can help start the main engines; it does not provide propulsion.
That is why an aircraft can have cabin lighting, working systems and air conditioning while its main engines are stopped. Depending on the equipment available at the stand, those services may come from the APU or from external ground supplies.
| Function | Common arrangement | What varies |
| Electrical power | The APU drives a generator or generators | Electrical output and permitted operating conditions |
| Cabin conditioning | Compressed air can supply the air-conditioning system on conventional designs | Some aircraft use a different, more electrical architecture |
| Main-engine start | The APU provides the energy needed for starting | That energy may be compressed air or electricity |
Why the aircraft type matters
Many familiar airliners use compressed air from the APU, known as bleed air, to drive the main-engine starters. The Boeing 787 instead uses electrical power for normal engine starting, supplied by the APU. Describing every APU as an air compressor for the main engines would therefore miss an important difference.
An APU can also provide an additional source of power in flight on appropriately equipped aircraft, within its operating limits. Whether it is running, available for use or required for a particular operation depends on the aircraft’s design, system condition and procedures.
APU versus ground power
A ground power unit supplies electricity from outside the aircraft. A separate pre-conditioned air connection can supply cabin air at the stand. Using those services can reduce the need to run the APU, which burns aircraft turbine fuel and produces noise and exhaust.
The hum heard while boarding may come from the APU, but fans, conditioning equipment and other airport machinery also make noise. Sound alone does not identify which power source is in use.
Power-system availability becomes especially relevant when planning remote routes under ETOPS requirements, where the approved aircraft configuration is part of the assessment.
Explore the job market
See the requirements in real pilot jobs
Explore openings in this career path and check each employer’s requirements.