Short answer
Most airliners use kerosene-based jet fuel, usually Jet A or Jet A-1. Turboprops also normally use jet fuel, even though they have propellers. Many small piston aircraft use aviation gasoline, or avgas, while some diesel piston engines use approved jet fuel. The correct fuel depends on the aircraft and engine approvals.
Answer
Most passenger jets use kerosene-based turbine fuel, commonly Jet A or Jet A-1. The same broad fuel category powers many turboprop aircraft and turbine helicopters. The engine type matters more than whether the aircraft has a visible propeller.
| Fuel | Typical use | What distinguishes it |
| Jet A | Turbine aircraft, especially in the United States | Kerosene-type fuel with a maximum specification freezing point of −40°C |
| Jet A-1 | Turbine aircraft worldwide | Kerosene-type fuel with a lower maximum specification freezing point of −47°C |
| Avgas | Many spark-ignition piston aircraft | Aviation gasoline; 100LL is a widely used leaded grade |
| Approved SAF blend | Aircraft approved for the resulting jet-fuel specification | Fuel containing approved sustainable components, supplied to the applicable specification |
Why do turboprops use jet fuel?
A turboprop uses a gas turbine to drive its propeller. Despite looking different from a passenger jet, its engine therefore belongs to the turbine family. A small propeller aircraft with a spark-ignition piston engine has a different fuel requirement.
There are exceptions to simple rules such as “piston engines use avgas”. Some aircraft diesel engines are approved for jet fuel, and some other piston installations permit specified unleaded fuels. Fuel must match the approval for the actual engine and airframe combination.
Is avgas the same as car petrol?
No. Avgas is produced to aviation specifications. The letters LL in 100LL mean low lead, not lead-free. Approved unleaded alternatives exist for some aircraft, but a pilot cannot assume that any road fuel or unleaded grade is interchangeable.
Where does sustainable aviation fuel fit?
Sustainable aviation fuel, or SAF, describes fuels made through approved pathways using alternatives to conventional fossil feedstocks. Approved blends that meet the required jet-fuel specification can be used within the aircraft’s approval. Permitted blending limits depend on the production pathway and specification.
SAF still produces carbon dioxide when burned. Its climate benefit is assessed over the fuel’s life cycle, including how its feedstock and production are accounted for.
Fuel planning is one part of pilot training. Separately, newer engines such as those in the A320neo aim to reduce the fuel needed to perform a flight.
Explore the job market
See the requirements in real pilot jobs
Explore openings in this career path and check each employer’s requirements.