FAQ ANSWER

What is the difference between QNH, QFE and standard pressure?

Short answer

QNH makes a pressure altimeter indicate altitude relative to mean sea level. QFE makes it indicate height above a specified local reference, usually an airfield or runway. Standard pressure, 1013.25 hPa, is used for flight levels so aircraft share a common pressure reference at higher levels.

Answer

QNH, QFE and standard pressure change the reference used by a pressure altimeter. The instrument senses air pressure and converts it into an indicated altitude. Setting the reference correctly allows pilots and controllers to use the same vertical scale.

SettingReferenceWhat the indication represents
QNHPressure setting related to mean sea levelAltitude above mean sea level, subject to altimetry errors
QFEPressure at a specified local datumHeight above that airfield, runway or other reference
Standard1013.25 hectopascals (hPa), or about 29.92 inches of mercury (inHg)Pressure altitude, expressed operationally as flight levels

A simple airfield example

Imagine an airfield with an elevation of 1,000 feet above sea level. On the ground, an altimeter correctly set to the local QNH should indicate approximately 1,000 feet. With the corresponding airfield QFE, it should indicate approximately zero. The aircraft has not moved; the reference has changed.

QFE does not measure clearance above every hill or building beneath the aircraft. Its datum remains the specified location. Likewise, a pressure altimeter is different from a radio altimeter, which measures distance to the surface immediately below the aircraft within its operating limits.

Why flight levels use standard pressure

At higher levels, a shared standard setting lets aircraft maintain vertical separation without each using a different local pressure. FL350 means an indicated pressure altitude of 35,000 feet on the standard setting. Its actual height above mean sea level changes with atmospheric conditions.

The change between altitude and flight-level references follows published transition procedures. Transition altitudes and levels vary by location and conditions, so there is no single worldwide changeover height.

The transition altitude is the published altitude associated with the change to flight levels during a climb. The transition level is the lowest usable flight level above it; its value can change with atmospheric pressure.

Local pressure information appears in METAR weather reports and is part of the information exchanged when pilots communicate with ATC.

Explore the job market

See the requirements in real pilot jobs

Explore openings in this career path and check each employer’s requirements.

View 118 pilot jobs
Recommended next step Pilot Career Guide

Continue your pilot path

© 2026 Skyreer – All Rights Reserved